Make sure that the device supports the physical size of your hard drive, such as 2. Digitech docking station issues. DIGITECH XC MANUAL Pdf Download. Unfortunately I only have info from the – All in 1 HDD docking stations, but digitec endeavour to find out more info on the other models. Username Please enter your username. Hard drive docking stations, just like hard drive enclosures, don't need drivers on Windows XP or later. It's the hard drive that's in it, and the usb port it's plugged into which needs drivers, but they are already built in to Windows XP and later versions. (Windows XP, however, needs Service Pack 1 or higher for USB 2.0 support).

I have a USB 2.0 IDE/SATA cable/interface, (HW-338?), which gets detected by my Win XP (SP3) system, but is declared as an unknown device. Therefore, an IDE or SATA drive plugged into it are not seen. (The drives do run up ok, via the separate power supply). No driver cd was supplied with the device, and the vendor insists that I don't need a driver for Windows XP. (The black plastic device has 2.5' and 3.5' drive interface connectors back-to-back, a SATA connector near one end of the body, and a sparkly silver USB cable coming out of the other end. Can anyone advise me, or point me in the direction of a solution?Please? I have a USB 2.0 IDE/SATA cable/interface, (HW-338?), which gets detected by my Win XP (SP3) system, but is declared as an unknown device.

Therefore, an IDE or SATA drive plugged into it are not seen. (The drives do run up ok, via the separate power supply). Bongo 2 keygen generator crack. No driver cd was supplied with the device, and the vendor insists that I don't need a driver for Windows XP. (The black plastic device has 2.5' and 3.5' drive interface connectors back-to-back, a SATA connector near one end of the body, and a sparkly silver USB cable coming out of the other end. Can anyone advise me, or point me in the direction of a solution?Please? AndySwain Mine says that after you hook it up you need to go into computer management>disk management and assign a drive letter.

I have a similar device, USB2SATAIDE from startech.com and I see it under disk management, but it states 'Disk 1; Unknown; Not Initialized' When you try to Initialize it states 'Device not ready'. I've rebooted with the hard drive attached and it won't work, get the same issue. Have the Startech drivers, tried to use any one of those and Win 7 pro just comes back with 'Disk Drive' as the type of device and the current drivers, still doesn't work. Device Manager sees it as a USB Device under Disk Drives.

I've tried different hard drives, and different computers, all state the same issue. I'm guessing all the different hard drives I've tried are not bad drives. I was able to load Windows onto one when it was the main hard drive, but will not run as a USB attached device. I have a USB 2.0 IDE/SATA cable/interface, (HW-338?), which gets detected by my Win XP (SP3) system, but is declared as an unknown device. Therefore, an IDE or SATA drive plugged into it are not seen.